NXP Semiconductors PN7462 series User Manual page 141

NXP Semiconductors
Table 179. Communication overview for active communication mode
Communication
direction
Initiator  Target
Target  Initiator
A dedicated host controller firmware is required to handle the NFCIP-1 protocol.
Note: Transfer Speeds above 424 kbit/s are not defined in the NFCIP-1 standard.
12.3.1.3 Passive communication mode
Passive Communication mode means that the target answers to an initiator command in
a load modulation scheme. The initiator is active (powered) to generate the RF field.
UM10858
User manual
COMPANY PUBLIC
Fig 31. Active communication mode
106 kbit/s
According to ISO/IEC
14443A 100% ASK,
modified Miller Coded
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
212 kbit/s
According to FeliCa
Manchester Coded
314514
UM10858
PN7462 family HW user manual
424 kbit/s
8 – 30 % ASK
© NXP B.V. 2018. All rights reserved.
141 of 345