NXP Semiconductors
14.3 Host interfaces
The Host interface block comprises four sub-blocks shown in
The host interface block selects the interface according to the input port HIF_SELECTION
[3:1] (all listed in
manager. Only one interface is active at a time.
UM10858
User manual
COMPANY PUBLIC
1. I2C Slave
2. SPI Slave
3. HSU Slave
4. USB
Table
311) from the PCR, and connects this interface to the buffer
Fig 57. Block diagram of Host interface block
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
Fig 57
.These are:
© NXP B.V. 2018. All rights reserved.
265 of 345