NXP Semiconductors PN7462 series User Manual page 163

NXP Semiconductors
Bit Symbol
4 TX_DATA_ENABLE
3:2 TX_STOP_SYMBOL R/W
1:0 TX_START_SYMBO
L
Table 198. CLIF_TX_SYMBOL0_DEF_REG register (address 0040h)
* = reset value
Bit Symbol
31:28 RESERVED
27:0 TX_SYMBOL0_DEF
Table 199. CLIF_TX_SYMBOL1_DEF_REG register (address 0044h)
* = reset value
Bit Symbol
31:28 RESERVED
27:0 TX_SYMBOL1_DEF
Table 200. CLIF_TX_SYMBOL23_DEF_REG register (address 0048h)
* = reset value
Bit Symbol
31:24 RESERVED
23:16 TX_SYMBOL3_DEF
15:8 RESERVED
7:0 TX_SYMBOL2_DEF
Table 201. CLIF_TX_SYMBOL01_MOD_REG register (address 004Ch)
* = reset value
Bit Symbol
31:24 RESERVED
23:16 TX_SYMBOL3_DEF
15:9 RESERVED
8 TX_S01_MILLER_E
NABLE
UM10858
User manual
COMPANY PUBLIC
Access Value
R/W 0*
0*- 3h
00b
01b
10b
11b
R/W 0*-3h
00b
01b
10b
11b
Access Value
R 0
R/W 0* - FFFFFFFh
Access Value
R 0
R/W 0* - FFFFFFFh
Access Value
R 0
R/W 0* - FFh
R 0
R/W 0* - FFh
Access Value
R 0
R/W 0* - FFh
R 0
R/W 0*, 1
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
PN7462 family HW user manual
Description
If set to 1, transmission of data is enabled otherwise only
symbols are transmitted.
Defines which pattern symbol is sent as frame
stop-symbol
No symbol is sent
Symbol 1 is sent
Symbol 2 is sent
Symbol 3 is sent
Defines which symbol pattern is sent as frame start-symbol
No symbol is sent
Symbol 1 is sent
Symbol 2 is sent
Symbol 3 is sent
Description
Reserved
Pattern definition for Symbol0
Description
Reserved
Pattern definition for Symbol1
Description
Reserved
Pattern definition for Symbol3
RESERVED
Pattern definition for Symbol2
Description
Reserved
Pattern definition for Symbol3
Reserved
If set to 1, pulse modulation is applied according to modified
miller coding.
Note: Modified miller coding may be used only for
direct envelope output (TX_S01_ENV_TYPE == 0)
UM10858
© NXP B.V. 2018. All rights reserved.
163 of 345