NXP Semiconductors PN7462 series User Manual page 52

Table of Contents

Advertisement

NXP Semiconductors
6.7.1.8 PMU_INTERRUPT_ENABLE_REG
This register is a collection of Interrupt Enable commands.
Table 45. PMU_INTERRUPT_ENABLE_REG (address offset 0x3FE4)
Bit
Symbol
31:9
RESERVED
VBUSMON2_LOW_IRQ_ENABL
8
E
7
TXLDO_5V_MON_IRQ_ENABL
E
6
VCC_ILIM_ACT_IRQ_ENABLE
5
RESERVED
4
PVDD_IRQ_ENABLE
DCDC_OVERLOAD_IRQ_ENAB
3
LE
2
SCVDD_OVERLOAD_IRQ_ENA
BLE
1
TXLDO_OVERCURRENT_IRQ_
ENABLE
0
TEMPSENS_ERROR_IRQ_ENA
BLE
6.7.1.9 PMU_INTERRUPT_CLR_STATUS_REG
This register is a collection of Clear Interrupt Status commands with automatic clear if set
by software.
Table 46. PMU_INTERRUPT_CLR_STATUS_REG (address offset 0x3FE8)
Bit
Symbol
31:9
RESERVED
8
VBUSMON2_LOW_IRQ_CLEAR_S
TATUS
7
TXLDO_5V_MON_IRQ_CLEAR_S
TATUS
UM10858
User manual
COMPANY PUBLIC
Access
Value
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
R-
0x00
Access
Value
Description
-X
0x00
Reserved
-X
0x00
Clears status of Vbus monitor 2 going low
interrupt
-X
0x00
Clears status of TXLDO 5 V monitor interrupt.
Automatically cleared after 2 cycles if set by
software
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
PN7462 family HW user manual
Description
Reserved
Indicates enabled VBUS monitor 2 going
low interrupt
Indicates enabled TXLDO 5 V monitor
interrupt. Automatically cleared after 2
cycles if set by software
Indicates enabled VCC current limiter
active interrupt. Automatically cleared
after 2 cycles if by software
Reserved
Indicates enabled PVDD interrupt.
Automatically cleared after 2 cycles if by
software
Indicates enabled DC-to-DC converter
overload interrupt. Automatically cleared
after 2 cycles if by software
Indicates enabled SCVD overload
interrupt. Automatically cleared after 2
cycles if by software
Indicates enabled TXLDO overcurrent
interrupt. Automatically cleared after 2
cycles if by software
Indicates enabled temperature sensor
interrupt. Automatically cleared after 2
cycles if by software
UM10858
© NXP B.V. 2018. All rights reserved.
52 of 345

Advertisement

Table of Contents
loading

Table of Contents