Table of Contents
Advertisement
NXP Semiconductors
HOSTIF_BUFFER_RX1_LEN_REG
This register is used to indicate the number of bytes stored in RX buffer 1
Table 337. HOSTIF_BUFFER_RX1_LEN_REG (address offset 0x0050)
Bit
31:13
12
11
10:0
HOSTIF_BUFFER_RX2_LEN_REG
This register is used to indicate the number of bytes stored in RX buffer 2
Table 338. HOSTIF_BUFFER_RX2_LEN_REG (address offset 0x0054)
Bit
31:13
12
11
10:0
HOSTIF_BUFFER_RX3_LEN_REG
This register is used to indicate the number of bytes stored in RX buffer 3
Table 339. HOSTIF_BUFFER_RX3_LEN_REG (address offset 0x0058)
Bit
31:13
12
UM10858
User manual
COMPANY PUBLIC
Symbol
Access
RESERVED
R
RX1_PEC_OK
R
RX1_PEC_RECEIVED R
RX1_LENGTH
R
Symbol
Access
RESERVED
R
RX2_PEC_OK
R
RX2_PEC_RECEIVED R
RX2_LENGTH
R
Symbol
Access
RESERVED
R
RX3_PEC_OK
R
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
PN7462 family HW user manual
Reset
Description
Value
0
Reserved
0
1 - Last byte received matched computed
PEC. Only valid if RX1_PEC_RECEIVED
is 1
0
1 - Last received was a PEC. 0- hardware
could not detected if last received byte
was a PEC, payload analysis required.
0
Number of bytes received in buffer RX1
(active when
HOSTIF_CONTROL_REG.NCI_LENGTH_M
ODE=1)
Reset
Description
Value
0
Reserved
0
1 - Last byte received matched computed
PEC. Only valid if RX2_PEC_RECEIVED
is 1
0
1 - Last received was a PEC. 0- hardware
could not detected if last received byte
was a PEC, payload analysis required.
0
Number of bytes received in buffer RX2
(active when
HOSTIF_CONTROL_REG.NCI_LENGTH_M
ODE=1)
Reset
Description
Value
0
Reserved
0
1 - Last byte received matched computed
PEC. Only valid if RX3_PEC_RECEIVED
is 1
UM10858
© NXP B.V. 2018. All rights reserved.
300 of 345
Advertisement
Table of Contents
