NXP Semiconductors PN7462 series User Manual page 195

NXP Semiconductors
Bit Symbol
20 RX_EMD_IRQ_SET_STATUS R
19 TIMER3_IRQ_SET_STATUS
18 TIMER2_IRQ_SET_STATUS
17 TIMER1_IRQ_SET_STATUS
16 TIMER0_IRQ_SET_STATUS
15 CLOCK_ERROR_IRQ_SET_
STATUS
[1]
14 INTERNAL_USE
[1]
13 INTERNAL_USE
12 RF_ACTIVE_ERROR_IRQ_SE
T_STATUS
11 TX_RFON_IRQ_SET_STATU
S
10 TX_RFOFF_IRQ_SET_STATU
S
9 RFON_DET_IRQ_SET_STAT
US
8 RFOFF_DET_IRQ_SET_STAT
US
7:6 RESERVED
5 STATE_CHANGE_IRQ_SET_
STATUS
4 CARD_ACTIVATED_IRQ_SET
_STATUS
MODE_DETECTED_IRQ_SE
3
T_STATUS
2 IDLE_IRQ_SET_STATUS
1 TX_IRQ_SET_STATUS
0 RX_IRQ_SET_STATUS
[1] Bit-field are either set by HAL or use default value from CLIF EEPROM default settings
UM10858
User manual
COMPANY PUBLIC
Access Value Description
0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
Writing 1 to this register does set the corresponding IRQ
R 0*, 1
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 For internal use
R 0*, 1 For internal use
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0 Reserved
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
Writing 1 to this register does set the corresponding IRQ
R 0*, 1
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
R 0*, 1 Writing 1 to this register does set the corresponding IRQ
STATUS flag
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
© NXP B.V. 2018. All rights reserved.
195 of 345