NXP Semiconductors PN7462 series User Manual page 183

NXP Semiconductors
Bit Symbol
2 TX_CW_TO_MAX_R
M
1 TX_CW_TO_MAX_A
LM_CM
0 TX_PD
[1] Bit-field are either set by HAL or use default value from CLIF EEPROM default settings
Table 230. CLIF_ANA_RX_REG register (address 0110h)
* = reset value
Bit Symbol
[1]
31:19 INTERNAL_USE
[1]
18 INTERNAL_USE
[1]
17 INTERNAL_USE
[1]
16 INTERNAL_USE
[1]
15 INTERNAL_USE
[1]
14 INTERNAL_USE
[1]
13 INTERNAL_USE
[1]
12 INTERNAL_USE
[1]
11 INTERNAL_USE
[1]
10 INTERNAL_USE
[1]
9:8 INTERNAL_USE
[1]
7 INTERNAL_USE
[1]
6 INTERNAL_USE
[1]
5 INTERNAL_USE
[1]
4 INTERNAL_USE
3:2 RX_HPCF
1:0 RX_GAIN
[1] Bit-field are either set by HAL or use default value from CLIF EEPROM default settings
Table 231. CLIF_ANA_CM_CONFIG_REG register (address 0114h)
* = reset value
Bit Symbol
31:17 RESERVED
[1]
16 INTERNAL_USE
[1]
15 INTERNAL_USE
[1]
14 INTERNAL_USE
13:12 CM_MILLER_SENS
UM10858
User manual
COMPANY PUBLIC
Access Value
R/W 0* - 1h
R/W 0-1*h
R/W 0-1h*
Access Value
R 0*
R/W 0*-1
R/W 0-1*
R/W 0-1*
R/W 0-1*
R/W 0-1*
R/W 0*-1
R/W 0-1*
R/W 0-1*
R/W 0*-1
R/W 0h*-3h
R/W 0*-1
R/W 0*-1
R/W 0-1*
R/W 0*-1
R/W 0h*-3h
R/W 0h*-3h
Access Value
R 0*
R/W 0-1*
R/W 0-1*
R/W 0-1*
R/W 0h*-3h
0*
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
PN7462 family HW user manual
Description
TX HI output is the maximum voltage obtainable from charge
pump (RM setting); if set to 1 -> TX_CW_AMPLITUDE_RM
is overruled.
TX HI output is the maximum voltage obtainable from charge
pump (CM setting); if set to 1 -> TX_CW_AMPLITUDE_CM
is overruled.
charge pumps clamped to tvdd
Description
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
For internal use
Lower Corner Frequency: 00->45 kHz, 01->85 kHz, 10->150
kHz, 11->250 kHz
Gain Adjustment BBA: 00->33 dB, 01->40 dB, 10->50 dB,
11->57 dB
Description
Reserved
For internal use
For internal use
For internal use
Configuration bits for reference level of Miller demodulator
(with respect to peak-peak input voltage)
30 %
UM10858
© NXP B.V. 2018. All rights reserved.
183 of 345