NXP Semiconductors PN7462 series User Manual page 111

NXP Semiconductors
Bit Symbol
6
PVDD_CURLIM_ACT_CLR
_ENABLE
5
TEMPERROR1_INT_CLR_
ENABLE
4
TEMPERROR0_INT_CLR_
ENABLE
3 SUSPEND
_DEFAULTED_INT_CLR_E
NABLE
2 RESERVED
1
SUSPEND_INT_CLR_ENA
BLE
0
GPIO_INT_CLR_ENABLE
Table 131. PCR_INT_SET_ENABLE_REG (address offset 0x3FDC)
Bit Symbol
31:28 RESERVED
27
GPIO12_PAD_HIGH_INT_S
ET_ENABLE
26
GPIO11_PAD_HIGH_INT_S
ET_ENABLE
25
GPIO10_PAD_HIGH_INT_S
ET_ENABLE
24
GPIO9_PAD_HIGH_INT_S
ET_ENABLE
23
GPIO8_PAD_HIGH_INT_S
ET_ENABLE
22
GPIO7_PAD_HIGH_INT_S
ET_ENABLE
21
GPIO6_PAD_HIGH_INT_S
ET_ENABLE
20
GPIO5_PAD_HIGH_INT_S
ET_ENABLE
19
GPIO4_PAD_HIGH_INT_S
ET_ENABLE
18
GPIO3_PAD_HIGH_INT_S
ET_ENABLE
UM10858
User manual
COMPANY PUBLIC
Access Value Description
1: Disable VBUSP monitor low interrupt
PVDD current limiter active interrupt clear enable.
-x 0x00 1: Disable PVDD current limiter interrupt
Temperature error 1 interrupt clear enable
-x 0x00 1: Disable temperature sensor 1 error interrupt
Temperature error 0 interrupt clear enable
-x 0x00 1: Disable temperature sensor 0 error interrupt
Suspend defaulted interrupt clear enable
-x 0x00 1: Disable suspend prevented interrupt
-x 0x00 Reserved
suspend interrupt clear enable.
-x 0x00 1: Disable suspend(exit) interrupt
GPIO interrupt clear enable
-x 0x00 1: Disable GPIO interrupt
Access Value Description
-x 0x00 Reserved
GPIO12 pad going high interrupt set enable
-x 0x00 1: Enable GPIO12 interrupt
GPIO11 pad going high interrupt set enable
-x 0x00 1: Enable GPIO11 interrupt
GPIO10 pad going high interrupt set enable
-x 0x00 1: Enable GPIO10 interrupt
GPIO9 pad going high interrupt set enable
-x 0x00 1: Enable GPIO9 interrupt
GPIO8 pad going high interrupt set enable
-x 0x00 1: Enable GPIO8 interrupt
GPIO7 pad going high interrupt set enable
-x 0x00 1: Enable GPIO7 interrupt
GPIO6 pad going high interrupt set enable
-x 0x00 1: Enable GPIO6 interrupt
GPIO5 pad going high interrupt set enable
-x 0x00 1: Enable GPIO5 interrupt
GPIO4 pad going high interrupt set enable
-x 0x00 1: Enable GPIO4 interrupt
GPIO3 pad going high interrupt set enable
-x 0x00 1: Enable GPIO3 interrupt
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
© NXP B.V. 2018. All rights reserved.
111 of 345