NXP Semiconductors PN7462 series User Manual page 53

NXP Semiconductors
Bit Symbol
6 VCC_ILIM_ACT_IRQ_CLEAR_STA
TUS
5 RESERVED
4 PVDD_IRQ_CLEAR_STATUS
3 DCDC_OVERLOAD_IRQ_CLEAR_
STATUS
2 SCVDD_OVERLOAD_IRQ_CLEAR
_STATUS
1 TXLDO_OVERCURRENT_IRQ_CL
EAR_STATUS
0 TEMPSENS_ERROR_IRQ_CLEAR
_STATUS
6.7.1.10 PMU_INTERRUPT_SET_STATUS_REG
This register is a collection of Set Interrupt Status commands with automatic clear if set
by software.
Table 47. PMU_INTERRUPT_SET_STATUS_REG (address offset 0x3FEC)
Bit Symbol
31:9 RESERVED
8 VBUSMON2_LOW_IRQ_SET_ST
ATUS
7 TXLDO_5V_MON_IRQ_SET_ST
ATUS
6 VCC_ILIM_ACT_IRQ_SET_STAT
US
5 RESERVED
4 PVDD_IRQ_SET_STATUS
3 DCDC_OVERLOAD_IRQ_SET_S
TATUS
2 SCVDD_OVERLOAD_IRQ_SET_
STATUS
1 TXLDO_OVERCURRENT_IRQ_S
ET_STATUS
UM10858
User manual
COMPANY PUBLIC
Access Value Description
-X 0x00 Clears status of VCC current limiter active
interrupt. Automatically cleared after 2 cycles if
clear by software
-X 0x00 Reserved
-X 0x00 Clears status of PVDD interrupt. Automatically
cleared after 2 cycles if clear by software
-X 0x00 Clears status of DC-to-DC converter overload
interrupt. Automatically cleared after 2 cycles if
clear by software
-X 0x00 Clears status of SCVD overload interrupt.
Automatically cleared after 2 cycles if clear by
software
-X 0x00 Clears status of TXLDO overcurrent interrupt.
Automatically cleared after 2 cycles if set by
software
-X 0x00 Clears status of temperature sensor interrupt.
Automatically cleared after 2 cycles if set by
software
Access Value Description
-X 0x00 Reserved
-X 0x00 Sets status of Vbus monitor 2 going low interrupt
-X 0x00 Sets status of TXLDO 5 V monitor interrupt.
Automatically cleared after 2 cycles if set by
software
-X 0x00 Sets status of VCC current limiter active interrupt.
Automatically cleared after 2 cycles if clear by
software
-X 0x00 Reserved
-X 0x00 Sets status of PVDD interrupt. Automatically
cleared after 2 cycles if clear by software
-X 0x00 Sets status of DC-to-DC converter overload
interrupt. Automatically cleared after 2 cycles if
clear by software
-X 0x00 Sets status of SCVD overload interrupt.
Automatically cleared after 2 cycles if clear by
software
-X 0x00 Sets status of TXLDO overcurrent interrupt.
Automatically cleared after 2 cycles if set by
software
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
© NXP B.V. 2018. All rights reserved.
53 of 345