NXP Semiconductors PN7462 series User Manual page 115

NXP Semiconductors
Bit Symbol
4
TEMPERROR0_INT_ENAB
LE
3
SUSPEND_DEFAULTED_I
NT_ENABLE
2 RESERVED
1
SUSPEND_INT_ENABLE
0
GPIO_INT_ENABLE
Table 134. PCR_INT_CLR_STATUS_REG (address offset 0x3FE8)
Bit Symbol
31:28 RESERVED
27
GPIO12_PAD_HIGH_INT_C
LR_STATUS
26
GPIO11_PAD_HIGH_INT_C
LR_STATUS
25
GPIO10_PAD_HIGH_INT_C
LR_STATUS
24
GPIO9_PAD_HIGH_INT_CL
R_STATUS
23
GPIO8_PAD_HIGH_INT_CL
R_STATUS
22
GPIO7_PAD_HIGH_INT_CL
R_STATUS
21
GPIO6_PAD_HIGH_INT_CL
R_STATUS
20
GPIO5_PAD_HIGH_INT_CL
R_STATUS
19
GPIO4_PAD_HIGH_INT_CL
R_STATUS
18
GPIO3_PAD_HIGH_INT_CL
R_STATUS
17
GPIO2_PAD_HIGH_INT_CL
R_STATUS
16
GPIO1_PAD_HIGH_INT_CL
R_STATUS
15:11 RESERVED
UM10858
User manual
COMPANY PUBLIC
Access Value Description
Temperature error 0 interrupt enable
1: Indicates temperature sensor 0 error interrupt
r- 0x00 enabled.
Suspend defaulted interrupt enable
r- 0x00 1: Indicates suspend prevented interrupt enabled.
r- 0x00 Reserved
Suspend interrupt enable.
r- 0x00 1: Indicates suspend (exit) interrupt enabled.
GPIO interrupt clear enable
r- 0x00 1: Indicates GPIO interrupt enabled.
Access Value Description
-x 0x00 Reserved
GPIO12 pad going high interrupt clear status
-x 0x00 1: Clear GPIO12 interrupt. Auto clear after 2 cycles.
GPIO11 pad going high interrupt clear status
-x 0x00 1: Clear GPIO11 interrupt. Auto clear after 2 cycles.
GPIO10 pad going high interrupt clear status
-x 0x00 1: Clear GPIO10 interrupt. Auto clear after 2 cycles.
GPIO9 pad going high interrupt clear status
-x 0x00 1: Clear GPIO9 interrupt. Auto clear after 2 cycles.
GPIO8 pad going high interrupt clear status
-x 0x00 1: Clear GPIO8 interrupt. Auto clear after 2 cycles.
GPIO7 pad going high interrupt clear status
-x 0x00 1: Clear GPIO7 interrupt. Auto clear after 2 cycles.
GPIO6 pad going high interrupt clear status
-x 0x00 1: Clear GPIO6 interrupt. Auto clear after 2 cycles.
GPIO5 pad going high interrupt clear status
-x 0x00 1: Clear GPIO5 interrupt. Auto clear after 2 cycles.
GPIO4 pad going high interrupt clear status
-x 0x00 1: Clear GPIO4 interrupt. Auto clear after 2 cycles.
GPIO3 pad going high interrupt clear status
-x 0x00 1: Clear GPIO3 interrupt. Auto clear after 2 cycles.
GPIO2 pad going high interrupt clear status
-x 0x00 1: Clear GPIO2 interrupt. Auto clear after 2 cycles.
GPIO1 pad going high interrupt clear status
-x 0x00 1: Clear GPIO1 interrupt. Auto clear after 2 cycles.
-x 0x00 Reserved
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
© NXP B.V. 2018. All rights reserved.
115 of 345