NXP Semiconductors PN7462 series User Manual page 326

NXP Semiconductors
Bit Symbol
28 VbusDebounced
31:29 RESERVED
15.4.2.2 USB info register
Table 357. USB info register (address offset = 0x04)
Reset value: depends on the CHIP_ID value
Bit Symbol
10:0 FRAME_NR
14:11 ERR_CODE
15 RESERVED
31:16 CHIP_ID
UM10858
User manual
COMPANY PUBLIC
Value Description
This bit indicates if Vbus is detected or not. The bit raises
immediately when Vbus becomes high. It drops to zero if Vbus is
low for at least 3 ms. If this bit is high and the DCon bit is set, the
hardware will enable the pull-up resistor to signal a connect.
Reserved
Value Description
Frame number. It contains the frame number of the last
successfully received SOF. In case no SOF was received by the
device at the beginning of a frame, the frame number returned is
that of the last successfully received SOF. In case the SOF frame
number contained a CRC error, the frame number returned will be
the corrupted frame number as received by the device.
error code which last occurred:
0x0 No error
0x1 PID encoding error
0x2 PID unknown
0x3 Packet unexpected
0x4 Token CRC error
0x5 Data CRC error
0x6 Time out
0x7 Babble
0x8 Truncated EOP
0x9 Sent/receive NAK
0xA Sent stall
0xB Overrun
0xC Sent empty packet
0xD Bitstuff error
0xE Sync error
0xF Wrong data toggle
Reserved
Chip identification: indicates major and minor revision of the IP
- [31:24] = Major revision
- [23:16] = Minor revision
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
Reset
Value
0
0
Reset
Value
0
0
0
0
© NXP B.V. 2018. All rights reserved.
Access
RO
RO
Access
RO
R/W
RO
RO
326 of 345