Clear Ip Bgp Ipv6 Dampening - Dell Z9500 Reference Manual

ipv4
ipv6
unicast
multicast
soft
in
out
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0

clear ip bgp ipv6 dampening

Clear information on route dampening and return suppressed route to active state.
Z9500
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
ipv6-address
Command EXEC Privilege
Modes
Border Gateway Protocol
(OPTIONAL) Enter the keyword ipv4 to select options for
that address family.
(OPTIONAL) Enter the keyword ipv6 to select options for
that address family.
(OPTIONAL) Enter the keyword unicast to select the
unicast option within the selected address family.
(OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family. Multicast
is supported on IPv4 only.
(OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session, that
is, BGP Soft Reconfiguration.
(OPTIONAL) Enter the keyword in to activate only inbound
policies.
(OPTIONAL) Enter the keyword out to activate only
outbound policies.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
497