Qos; Cos Queue Mapping - Siemens SCALANCE XM-400 Configuration Manual

● Mirroring
Enable or disable port mirroring. You can configure other settings in "Layer 2 > Mirroring".
● Loop Detection
Enable or disable the loop detection function. This allows loops in the network to be
detected. You will find other settings in "Layer 2 > Loop Detection"
● PTP
The following setting is possible:
– off
– transparent
You will find other settings in "Layer 2 > PTP"
5.5.2

QoS

5.5.2.1

CoS queue mapping

CoS queue
Here, CoS priorities are assigned to certain queues (Traffic Queues).
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
The device does not process any PTP messages. PTP messages are, however,
forwarded according to the rules of the switch.
The device adopts the function of a transparent clock and forwards PTP messages to
other nodes while at the same time making entries in the correction field of the PTP
message.
Configuring with Web Based Management
5.5 The "Layer 2" menu
249