Show Qos Cos-Map - Siemens SCALANCE XC-200 Configuration Manual

Load control
10.5 Service classes
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos broadcast-priority
Result
The current priority of the broadcast frames is displayed.
Further notes
You configure the priority of broadcast frames with the broadcast-priority command.
10.5.1.3

show qos cos-map

Description
This command shows the assignment table of CoS priorities to queues.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos cos-map
Result
The assignment table of CoS priorities to queues is displayed.
Further notes
You configure the assignment of the CoS priority to a queue with the cos-map command.
480
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06