Dhcp Client; The "Show" Commands; Show Ip Dhcp Client Stats; Show Ip Dhcp Client - Siemens SCALANCE XC-200 Configuration Manual

Network protocols

7.2 DHCP client

7.2 DHCP client
This section describes commands of the Dynamic Host Configuration Protocol (DHCP).
7.2.1

The "show" commands

This section describes commands with which you display various settings.
7.2.1.1

show ip dhcp client stats

Description
With this command, you display the statistical counters of the DHCP client.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dhcp client stats
Result
The counters are displayed.
7.2.1.2

show ip dhcp client

Description
With this command, you display the configuration settings of the DHCP client.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
282
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06