Rep 10.19 Exit Illuminator Pwb - Xerox ColorQube 9303 Series Service Manual

4. Remove roller nip N, Figure 3.
2
Remove the screws marked A.
A
Figure 3 Roller nip N removal
Replacement
Replacement is the reverse of the removal procedure.
ColorQube® 9303 Family
3
Remove the cover
and roller nip N.
A
A
Correct orientation of spring
and nip idler assembly.
Nip idler assembly.
Spring.

REP 10.19 Exit Illuminator PWB

Parts List on PL 10.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the exit paper path,
2. Remove diverter gate, REP
3. Remove the paper guide,
February 2013
4-89
WARNING
GP 14. Disconnect the power cord
WARNING
REP 10.20.
10.13.
Figure 1.
1
With the jam clearance door opened, release the
3 retaining tabs. Then remove the inner paper
guide.
Figure 1 Paper guide removal
REP 10.18, REP 10.19
Repairs/Adjustments