Option Devices For The Respective Connection - Mitsubishi Electric GOT2000 Series Connection Manual

1.3

Option Devices for the Respective Connection

The following shows the option devices to connect in the respective connection type.
For the specifications, usage and connecting procedure on option devices, refer to the respective device manual.
1.3.1 Communication module
Product name
Bus connection unit
Serial communication unit
MELSECNET/H communication unit
MELSECNET/10 communication unit
CC-Link IE Controller
Network communication unit
CC-Link IE Field Network communication
unit
CC-Link communication unit
Ethernet communication unit
Wireless LAN communication unit
*1
*2
*3
*4
*5
*6
1 - 22
1.3 Option Devices for the Respective Connection
Model
GT15-QBUS
GT15-QBUS2
GT15-ABUS
GT15-ABUS2
GT15-75QBUSL
GT15-75QBUS2L
GT15-75ABUSL
GT15-75ABUS2L
GT15-RS2-9P
GT15-RS4-9S
GT15-RS4-TE
GT15-J71LP23-25
GT15-J71BR13
GT15-J71LP23-25
GT15-J71BR13
GT15-J71GP23-SX
GT15-J71GF13-T2
GT15-J61BT13
GT25-J71E71-100
*1
GT25-WLAN
Data transfer in wireless LAN communication may not be as stable as that in cable communication.
A packet loss may occur depending on the surrounding environment and the installation location.
Be sure to perform a confirmation of operation before using this product.
When a wireless LAN configuration of GT Designer3 the [Operation Mode] is set to [access point], the maximum connection
number is a five (recommended).
The product with hardware version A or later (manufactured in December 2013) complies with the regulation.
The product with hardware version A can be used only in Japan.
The product with hardware version B or later (manufactured from October 2014) complies with the regulation.
The product with hardware version B or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, and Liechtenstein.
The product with hardware version D or later (manufactured from May 2016) complies with the regulation.
The product with hardware version D or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.
The product complies with the RE Directive from March 31, 2017.
Specifications
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (1ch) unit standard model
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (2ch) unit standard model
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit standard model
For A/QnACPU, motion controller CPU (A series)
Bus connection (2ch) unit standard model
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (1ch) unit slim model
For QCPU (Q mode), motion controller CPU (Q series)
Bus connection (2ch) unit slim model
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit slim model
For A/QnACPU, motion controller CPU (A series)
Bus connection (1ch) unit slim model
RS-232 serial communication unit (D-sub 9-pin (male))
RS-422/485 serial communication unit (D-sub 9-pin (female))
RS-422/485 serial communication unit (terminal block)
Optical loop unit
Coaxial bus unit
Optical loop unit
(MELSECNET/H communication unit used in the MNET/10 mode)
Coaxial bus unit
(MELSECNET/H communication unit used in the MNET/10 mode)
Optical loop unit
CC-Link IE Field Network (1000BASE-T) unit
Intelligent device station unit CC-LINK Ver. 2 compatible
Ethernet (100Base-TX) unit
• Used for the connection to the IEEE802.11b/g/n compliant, built-in
antenna, access point (master unit)
computers, tablets, and smartphones.
• Compliance with
*3 *4
Japan Radio Law , FCC , RE
*2
, station (slave unit), personal
*6 *4 *5 *5
(R&TTE ), SRRC , KC