4-12 :TRIGger Subsystem
:TRIGger[:SEQuence]:VIDeo:DELay <percentage> or <time>
:TRIGger[:SEQuence]:VIDeo:DELay?
Title: Video Trigger Position (Time)
Description: This command sets the video triggering delay as either a percentage of
Parameter: <percentage> or <time>
Default Value: –1
Default Unit: %
Range: –100% to +200% (–1 ms to +2 ms)
Example: To set the delay to 1 ms:
Front Panel Access: Shift-3 (Sweep), Triggering, Delay
4-50
the display or in time units. If setting the delay by time is desired, then
time units must be specified when sending the command. The query
version of this command returns the video triggering delay as a
percentage.
:TRIGger:SEQuence:VIDeo:DELay 1 ms
To set the delay to 1%:
:TRIGger:SEQuence:VIDeo:DELay 1
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM