PTC Commands
:MMEMory:STORe:TRACe <integer>,<filename>
Description: Stores the trace into the file specified by <filename>. <filename>
Cmd Parameters: <integer>,<filename>
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To save a measurement file:
Front Panel Access: Shift 7 (File), Save Measurement
Note
IQ Data measurements can not be saved on the instrument.
S412E PM
should be enclosed in either single quotes (' ') or double quotes (" ") and
should not contain a file extension. Use the command MMEMory:MSIS
to set the current save location. The <integer> parameter is not
currently used, but it must be sent. Send a 0.
:MMEMory:STORe:TRACe 0,"xxx"
PN: 10580-00319 Rev. N
15-8 :MMEMory Subsystem
15-19