Anritsu LMR Master S412E Programming Manual page 110

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

5-2 :CALCulate Subsystem

Graph Type and Returned Units (Sheet 2 of 2)

Real Impedance

Imaginary Impedance

Cmd Parameter: NA (query only)

Query Parameter: <char> FDATa|SDATa|FMEM|SMEM

Query Response: <block> (returns block data)

Related Command: :FORMat:DATA

Front Panel Access: NA

SDATa: Complex measurement data. The returned numbers (which are

independent of the Graph Type that is associated with the trace) are the

complex measurement data (Real and Imaginary) for each point of the

trace. A 551 point trace therefore has a total of 1102 points that get

transferred.

FMEM: Formatted (or Final) Memory data. Similar to FDATa, but for

memory data.

SMEM: Complex memory data. Similar to SDATa, but for memory

Note that in order to get valid data when querying for memory data, you

must first store a trace into memory using the command

CALC:MATH:MEMorize. The format of the block data that is returned

can be specified by the command :FORMat:DATA. The response

begins with an ASCII header that specifies the number of data bytes. It

appears in the format #AX, where A is the number of digits in X,

and X is the number of bytes that follow the header. Each data point is

separated by a comma delimiter.

PN: 10580-00319 Rev. N

Returned Units

VNA Commands