Anritsu LMR Master S412E Programming Manual page 653

AM/FM/PM Commands
:MMEMory:STORe:STATe <integer>,<file name>
Title: Save Setup
Description: Stores the current setup into the file specified by <file name>. <file
Parameter: <integer>, <file name>
Related Command: :MMEMory:LOAD:STATe
Front Panel Access: Shift-7 (File)
:MMEMory:STORe:TRACe <integer>,<file name>
Title: Save Measurement
Description: Stores the trace into the file specified by <file name>. <file name>
Parameter: <integer>, <file name>
Example: To save the trace into the file name "trace":
Related Command: :MMEMory:LOAD:TRACe
Front Panel Access: Shift-7 (File), Save
S412E PM
name> should be enclosed in either single quotes (' ') or double quotes ("
") and should not contain a file extension. Use the command
MMEMory:MSIS to set the current save location. The <integer>
parameter is not currently used, but it must be sent. Send a value of 0.
:MMEMory:MSIS INTernal|USB
should be enclosed in either single quotes (' ') or double quotes (" ") and
should not contain a file extension. Use the command MMEMory:MSIS
to set the current save location. The <integer> parameter is not
currently used, but it must be sent. Send a 0.
:MMEMory:STORe:TRACe 0,"trace"
:MMEMory:MSIS INTernal|USB
PN: 10580-00319 Rev. N
18-5 :MMEMory Subsystem
18-11