Anritsu LMR Master S412E Programming Manual page 82

4-11 :TRACe Subsystem
Table 4-1. Available Parameters in Spectrum Analyzer Mode (Sheet 3 of 5)
Parameter Name
IMPEDANCE
REFERENCE_FREQUENCY
SET_SWEEP_TIME
TRIGGER_TYPE
VIDEO_TRIGGER_LEVEL
TRIGGER_POSITION
PEAK_THRESHOLD
MARKER_TABLE
ACTIVE_ MEASUREMENT
ANTENNA
OCC_BW_METHOD
OCC_BW_PERCENT
OCC_BW_DBC
OCC_BW_MEASURED_ DB
OCC_BW_MEASURED_ PERCENT
OCC_BW_VALUE
OCC_BW_LINE_ MARKER_INFO
CH_PWR_WIDTH
CH_PWR_VALUE
CH_PWR_DENSITY
CH_PWR_LINE_ MARKER_INFO
ACPR_MAIN_CH_BW
ACPR_ADJC_CH_BW
ACPR_CHANNEL_ SPACING
ACPR_MAIN_CH_PWR
ACPR_UPPER_CH_PWR
ACPR_LOWER_CH_ PWR
ACPR_LOWER_CH_
LINE_MARKER_INFO
ACPR_MAIN_CH_LINE_
MARKER_INFO
4-40
Description
Input impedance
Reference freq
Minimum sweep time setting
Trigger type
Video trigger level
Trigger position as a percent of the display
Marker peak search threshold
Marker table status
Current measurement
Antenna index
Occupied bandwidth method
Occupied bandwidth % of power setting
Occupied bandwidth dBc setting
Occupied bandwidth measured dBc value
Occupied bandwidth measured % value
Measured occupied bandwidth
Mask off 16 bits at a time to get the display point
location of the 3 OBW display indicators
Channel power integration bandwidth
Measured channel power
Measured channel power density
Mask off 16 bits at a time to get the display point
location of the 2 channel power display indicators
ACPR main channel bandwidth
ACPR adjacent channel bandwidth
ACPR channel spacing
ACPR measured main channel power
ACPR measured upper channel power
ACPR measured lower channel power
Mask off 16 bits at a time to get the display point
location of the 2 ACPR lower channel display
indicators
Mask off 16 bits at a time to get the display point
location of the 2 ACPR main channel display
indicators
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM