Anritsu LMR Master S412E Programming Manual page 237

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

Mobile WiMAX Commands

:DISPlay Subsystem

This subsystem provides commands that modify the display of data for the user. They do not

modify the way in which data are returned to the controller.

:DISPlay:WINDow:TRACe:MAXHold OFF|ON|0|1

:DISPlay:WINDow:TRACe:MAXHold?

Title: Max Hold State

Description: Specifies whether the Max Hold is ON or OFF. The default value is ON.

Parameter: OFF|ON|0|1

Parameter Type: <boolean>

Default Value: 0

Front Panel Access: Shift-5 (Trace), Max Hold

:DISPlay:WINDow:TRACe:Y[:SCALe]:OFFSet <rel ampl>

:DISPlay:WINDow:TRACe:Y[:SCALe]:OFFSet?

Title: Power Offset

Description: Sets the power offset value for the y-axis.

Parameter: <rel ampl>

Default Value: 0 dB

Default Unit: dB

Range: 0 dB to 100 dB

Front Panel Access: Amplitude, Power Offset

That is, sending :DISP:WIND:TRAC:MAXH is equivalent to sending

:DISP:WIND:TRAC:MAXH ON. The query version of the command

returns a 1 if Max Hold is set to ON and returns a 0 if the Max Hold is

set to OFF. Note that this command is available only in the Spectrum

and EVM vs. Sub-carrier views.

PN: 10580-00319 Rev. N

8-3 :DISPlay Subsystem