Anritsu Network Master Series Quick Manual
  1. Manuals
  2. Brands
  3. Anritsu Manuals
  4. Test Equipment
  5. Network Master Series
  6. Quick manual

Anritsu Network Master Series Quick Manual

Gigabit ethernet modules
Hide thumbs Also See for Network Master Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Guide
Network Master Series
MT9090A Mainframe
MU909060A Series
Gigabit Ethernet Module
Additional safety and warning information
is provided within the "Network Master
Series MT9090A Mainframe MU909060A
Series Gigabit Ethernet Module" Operation
Manual. Please also refer to this document
before using the equipment.
Keep this manual with the equipment.
Document No.: M-W3173AE-2.0
Second Edition

Advertisement

Table of Contents
loading

Related Manuals for Anritsu Network Master Series

Summary of Contents for Anritsu Network Master Series

  • Page 1 Quick Guide Network Master Series MT9090A Mainframe MU909060A Series Gigabit Ethernet Module Second Edition Additional safety and warning information is provided within the “Network Master Series MT9090A Mainframe MU909060A Series Gigabit Ethernet Module” Operation Manual. Please also refer to this document before using the equipment.
  • Page 3 Quick Start Overview  LCD  Soft keys  Start key  Arrow keys and Set key  Menu/Power key...

  • Page 4: Power And Batteries

    Power and Batteries The unit can be powered in three ways. • External AC charger/adapter: Use this adapter to provide power from an AC source or to charge the battery pack. • External car plug cord/adapter (optional): • Ni-MH rechargeable battery pack: When installed, this battery powers the unit.

  • Page 5: Panel Keys

    Panel Keys The unit has four soft keys (F1 to F4) on the right hand side of the LCD. The function of each key is determined by the current operation mode and is displayed on the screen to the left of the key. Press to start the test.

  • Page 6: Back Panel

    Unit is off: Press the Menu/Power key to power-up. Unit is on: Press the Menu/Power key. Power Down can be selected from the pop-up menu. Back Panel  Battery compartment  Fastener  Module model/serial label  Compliance and warning labels General Operation...

  • Page 7: Power Up/Power Down

    Power Up/Power Down To Power Up: • Press the Menu/Power key. • The Top Menu is displayed. To Power Down: • Press the Menu/Power key to display the menu. • Highlight Power Down and press the Set key. • Highlight Yes and press the Set key. Selecting Application At the Top Menu, use the Left/Right/Up/Down arrow keys to highlight the application and press...
  • Page 9 Basic Application Screens An application uses three basic screens via soft keys at the right of the screen. Status: Gives status of hardware, connection and traffic Setup: Sets Interface, Test Automator and individual tests Result: Shows overall test progress and individual test results...

  • Page 10: Save And Load

    Save and Load To save setup • Press the Menu/Power key and select Save. • Use the Up/Down/Set keys to select the folder. • Press F1 to save. To load the setup/results file: • Press the Menu/Power key and select Load.

  • Page 11: Updating Firmware

    Anritsu firmware. The firmware file extension is BBM. Update the firmware as follows: 1. Copy the BBM file released by Anritsu to a USB flash drive (version 1.1 or later). 2. Plug the USB flash drive into the USB (Type A) port on the instrument.
  • Page 12 first Firmware Update screen is displayed. Note If there is more than one BBM file on the USB flash drive, the Choose Update File dialog is displayed in front of the first Firmware Update screen. Select (highlight) the correct BBM file and press the Set key to continue.
  • Page 13 8. Press the Set key to continue. The first Installing Update screen is displayed. 9. The installation is finished when the Finish button is displayed. Press the Set key to complete the firmware version upgrade.
  • Page 14 Operation Example Power Up/Power Down Power Up: Press the Menu button to start. Power Down: Press the Menu button again to stop.  When the selection options appear, use the Up/Down/ Left/Right keys to select Power Down and press the Set button.
  • Page 16 Four Application Modes At power up, the MT9090A Top Menu displays four application modes.  Ethernet Test  Reflector  Pass Through  Self Diagnostics Select the application mode to start. To return to the Top Menu, press the Menu button and select Top Menu.

  • Page 18: Ethernet Test

    Ethernet Test The network status can be checked at the Status screen. Each test type can be run consecutively using Test Automator. Generator Generates and receives Ethernet frames, and displays performance Ping Used to check whether destination IP connected and display ping packet return time Cable Test Validate and detect open/short...

  • Page 19: Pass Through

    Tests HTTP/FTP download performance Trace Route Displays network route to destination Y.1564 (Option) Runs ITU-T Y.1564 tests Reflector This mode is used to perform loopback tests over the network by an MT9090A unit at the far end of the fiber. The received frame send source and destination addresses are switched to send.

  • Page 20: Self Diagnostics

    Self Diagnostics This is the MT9090A Self Diagnostics mode. Press the Menu button to display the menu and select SW Options to display the MT9090A serial numbers and a list of the installed software options.

  • Page 22: Default Settings

    Default Settings Select Setup at the Top Menu. The following settings are recommended. Language: The language used in your country Auto Backlight Off: Off Select Apply and press the Set button after making the setting. Settings are displayed in English after firmware has been updated but can be set as required at this screen.
  • Page 24 Ethernet Test The MT9090A has a function for function for saving results automatically after testing to prevent loss of results. The Auto Save Mode requires time to save all set parameters. When performing multiple tests at troubleshooting, set this mode to OFF so that the results of each measurement are not saved.

  • Page 26: Basic Settings

    Basic Settings Port Selection Select the port to use at Setup/Interface using Set. The LED for the selected port becomes green. Check that the selected port is either A or B.
  • Page 27 Selected port LED Check selected becomes green. port is A or B.
  • Page 28 Tx Source Address Send Source Address: Setup/Interface/General MT9090A's MAC/IP address, VLAN, etc. Check that the selected port is A or B.
  • Page 29 Stream number appears if multistream option is installed.

  • Page 30: Destination Address

    Destination Address Destination Address: Setup/Test Automator/destination address in each Test Automator item This can be used to set a different destination address for each Test Automator item.
  • Page 32 Ethernet Test/Status This displays the Link status, optical power, etc.
  • Page 36 Document No.: M-W3173AE-2.0 Printed in Japan Printed on Recycled Paper...

This manual is also suitable for:

Mu909060a seriesMt9090a

Table of Contents