1-4 Remote Programming Setup and Interface
General Information
5. After the software is installed, close the Wizard by clicking Finish.
Figure 1-3.
USB Found New Hardware Wizard
USB Interface, Type Mini-B
The USB 2.0 Mini-B device connector can be used to connect the S412E directly to a PC. The
first time that the S412E is connected to a PC, the normal USB device detection is performed
by the computer operating system. The CD-ROM that is shipped with the instrument
contains a driver for Windows 2000, Windows XP, and Windows Vista. The driver is installed
when Master Software Tools is installed. Drivers are not available for earlier versions of the
Windows operating system. During the driver installation process, place the CD-ROM in the
computer drive and specify that the installation wizard should search the CD-ROM for the
driver.
1-6
PN: 10580-00319 Rev. N
S412E PM