[:Sense]:Frequency Subsystem - Anritsu LMR Master S412E Programming Manual

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

5-11 [:SENSe] Subsystem

[:SENSe]:FREQuency Subsystem

Commands in this subsystem pertain to the frequency settings of the instrument.

[:SENSe]:FREQuency:CENTer <freq>

[:SENSe]:FREQuency:CENTer?

Description: Sets the center frequency. Note that changing the value of the center

Cmd Parameter: <NRf> <freq> (hertz)

Query Response: <NR3> <freq> (hertz)

Default Value: For 1.6 GHz Model: 800250000 Hz

Default Unit: Hz

Range: For 1.6 GHz Model: 500 kHz to 1.6 GHz

Front Panel Access: Freq/Dist (or Freq), Center Freq

[:SENSe]:FREQuency:SPAN <freq>

[:SENSe]:FREQuency:SPAN?

Description: Sets the frequency span. Setting the value of <freq> to 0 Hz is the

Cmd Parameter: <NRf> <freq> (hertz)

Query Response: <NR3> <freq> (hertz)

Default Value: For 1.6 GHz Model: 1599500000 Hz

Default Units: Hz

Range: For 1.6 GHz Model: 0 Hz to 1.599500 GHz

Front Panel Access: Freq/Dist (or Freq), Span

frequency will change the value of the coupled

parameters: Start Frequency and Stop Frequency. It may also

change the value of the span.

For 6 GHz Model: 3000250000 Hz

For 6 GHz Model: 500 kHz to 6 GHz

equivalent of setting the span mode to zero span. Note that changing

the value of the frequency span will change the value of coupled

parameters: Start Frequency and Stop Frequency, and may change the

Center Frequency.

For 6 GHz Model: 5999500000 Hz

For 6 GHz Model: 0 Hz to 5.999500 GHz

PN: 10580-00319 Rev. N

VNA Commands