Anritsu LMR Master S412E Programming Manual page 59

Spectrum Analyzer Commands
:CALCulate:MARKer{1|2|3|4|5|6}:FIXed[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:FIXed[:STATe]?
Title: Marker Fixed State
Description: Sets the specified reference marker fixed state on or off. If Fixed is set to
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To set reference marker #1 to fixed:
Front Panel Access: Marker, More, Marker Style (Fixed)
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum
Title: Marker (Maximum) Peak Search
Description: Puts the specified marker at the maximum amplitude in the trace.
Front Panel Access: Marker, Marker [1/2/3/4/5/6], Peak Search
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum:LEFT
Title: Marker (Maximum) Peak Search Left
Description: Puts the specified marker on the next highest peak to the left of the
Related Command: :CALCulate:MARKer:PEAK:THReshold
Front Panel Access: Marker, More Peak Options, Next Peak Left
:CALCulate:MARKer{1|2|3|4|5|6}:MAXimum:RIGHt
Title: Marker (Maximum) Peak Search Right
Description: Puts the specified marker on the next highest peak to the right of the
Related Command: :CALCulate:MARKer:PEAK:THReshold
Front Panel Access: Marker, More Peak Options, Next Peak Right
S412E PM
on, then the selected reference markers stay at the amplitude they were
at when the marker is set to Fixed.
:CALCulate:MARKer:FIXed ON
:CALCulate:MARKer:FIXed 1
Marker, Marker [1/2/3/4/5/6], More Peak Options, Peak Search
current peak. The next highest peak must be above the peak threshold.
If no point meets that criterion, the marker is set to the first point on
the trace.
current peak. The next highest peak must be above the peak threshold.
If no point meets that criterion, the marker is set to the last point on the
trace.
PN: 10580-00319 Rev. N
4-2 :CALCulate Subsystem
4-17