Anritsu LMR Master S412E Programming Manual page 441

dPMR Commands
Table 13-1. Returned Parameter Values in Trace Preamble (Sheet 3 of 7)
Parameter Name
TRACE_GRAPH_TYPES_TOC
ACTIVE_GRAPH
ACTIVE_GRAPH_TX
ACTIVE_GRAPH_TOC
MAXIMIZE_GRAPH
MAXIMIZE_GRAPH_TX
MAXIMIZE_GRAPH_TOC
TOTAL_GRAPHS
MEAS_TYPE
EXTERNAL_REFERENCE
REFERENCE_FREQUENCY
MEAS_DISPLAY
MEAS_DISPLAY_TX
MEAS_DISPLAY_TOC
PATTERN
DYNAMIC_ATTENUATION
LOG_TYPE
KML_FLAG_LABEL
KML_FLAG_TIME
S412E PM
Backup trace graph type for Coverage (Not in use with
new mapping style).
Selected graph.
Backup active graph for Analyzer.
Backup active graph for Coverage (Not in use with
new mapping style).
Determines whether active graph is maximized or
minimized.
Backup maximize graph for Analyzer.
Backup maximize graph for Coverage (Not in use with
new mapping style).
Total graphs shown on the screen when minimized.
Analyzer is hard coded to 4 graphs.
Measurement type.
0 = Analyzer
1 = Not used
2 = Control (Only used in P25, P25p2, NXDN, DMR2)
3= Bit Capture (Only used in P25, P25p2, NXDN,
DMR2)
4 = Coverage
5 = NBFM Quieting (Only used in NBFM)
6 = NBFM SINAD (Only used in NBFM)
Not used.
The frequency to which the external reference is
locked.
State of the numerical display window in the Coverage
measurement.
Backup measurement display for Analyzer.
Backup measurement display for Coverage (Not in
use with new mapping style).
Receiver (Rx) pattern.
Auto receiver (Rx) range. Determines if reference
level is automatically adjusted according to the
receiver input signal.
Auto logging type (Not in use with new mapping style).
Not used.
Not used.
PN: 10580-00319 Rev. N
13-11 :TRACe Subsystem
Description
13-25