Trace Subsystem - Anritsu LMR Master S412E Programming Manual

7-10 :TRACe Subsystem

7-10 :TRACe Subsystem
This subsystem contains commands related to the transfer of trace data to and from the
instrument.
:TRACe:PREamble? <trace type>
Title: Returns trace header information for the specified trace. The <trace
Parameter: <trace type>
Related Command: :TRACe:DATA?
WiMAX, Mobile WiMAX Parameter Names
Table 7-1. Available Parameters in WiMAX and Mobile WiMAX Mode (Sheet 1 of 3)
Parameter Name
SN
UNIT_NAME
TYPE
DESCR
DATE
BASE_VER
APP_NAME
APP_VER
APP_MODE
REFERENCE_LEVEL
UNITS
SCALE
CENTER_FREQ
SIGNAL_STANDARD
7-22
type> must be one of the following:
SPECtrum|PVTime|ACPR|CONStln|SFLatness|EVSCarrier|EVSY
mbol
Data can be transferred to and from the 7 available display trace types.
Use the commands in the MMEMory subsystem to store and recall
traces from the instrument memory. The response begins with an
ASCII header. The header specifies the number of following bytes. It
looks like #AX, where A is the number of digits in X and X is the
number of bytes that follow the header. Parameters are returned in
comma-delimited ASCII format. Each parameter is returned as
"NAME=VALUE[ UNITS]," Valid parameter names are shown in
Table 7-1, "Available Parameters in WiMAX and Mobile WiMAX Mode"
on page 7-22.
PN: 10580-00319 Rev. N
Description
Instrument serial #
Instrument name
The data type (Setup or Data)
Trace name
Trace date/time
Base FW version
Application name
Application FW version
Application Mode
Reference Level
Amplitude units
Y axis scale
Center freq
Current signal standard (the value is the index of the
signal standard list, where a value of 0 is the first
index in the list)
Fixed WiMAX Commands
S412E PM