Anritsu LMR Master S412E Programming Manual page 90

4-11 :TRACe Subsystem
:TRACe3:OPERation MAXHold|MINHold|A-B|B-A
:TRACe3:OPERation?
Title: Trace C Operation
Description: This command specifies how successive traces are combined to produce
Parameter: MAXHold|MINHold|A-B|B-A
Parameter Type: <char>
Default Value: None
Range: MAXHold|MINHold|A-B|B-A
4-48
the resulting display values.
Setting the operation to MAXHold is equivalent to pressing the Shift-5
(Trace), Trace C Operations, Max Hold->C on the front panel. This
displays the largest signal for each display point over multiple sweeps.
Setting the operation to MINHold is equivalent to pressing the Shift-5
(Trace), Trace C Operations, Min Hold->C on the front panel. This
displays the smallest signal for each display point over multiple sweeps.
Setting the operation to A-B is equivalent to pressing the Shift-5
(Trace), Trace C Operations, A-B->C. This displays the difference
between trace A and trace B values in trace C.
Setting the operation to B-A is equivalent to pressing the Shift-5
(Trace), Trace C Operations, B-A->C. This displays the difference
between trace B and trace A values in trace C.
The query version of the command returns the current operation mode
or "NONE" if no operation is set.
PN: 10580-00319 Rev. N
Spectrum Analyzer Commands
S412E PM