Sense] Subsystem - Anritsu LMR Master S412E Programming Manual

7-11 [:SENSe] Subsystem

7-11 [:SENSe] Subsystem
The commands in this subsystem relate to device-specific parameters, not signal-oriented
parameters.
[:SENSe]:BANDwidth|BWIDth[:RESolution] <index>
[:SENSe]:BANDwidth|BWIDth[:RESolution]?
Title: Resolution Bandwidth
Description: Sets the resolution bandwidth. The <index> argument is a 1-based
Parameter: <index>
Default Value: The default bandwidth is 1.25MHz which is the 1st index in the
Front Panel Access: Setup, BW
[:SENSe]:CPRatio <index>
[:SENSe]:CPRatio?
Title: Cyclic Prefix Ratio (G)
Description: Selects the desired Cyclic Prefix Ratio from the list. The <index>
Parameter: <index>
Default Value: The default CP Ratio is 1/4 which is the 1st index in the CP Ratio list.
Front Panel Access: Setup, CP Ratio (G)
[:SENSe]:DEMod:CONStln:POINts?
Title: Number of Constellation Point
Required Option: 47
Description: Queries the number of Constellation points.
7-26
index of the position of the desired bandwidth in the instrument's
current bandwidth list. The list can be displayed on the instrument by
choosing the "BW" submenu button in the "Setup" menu. For example,
if the desired bandwidth is the 3rd item on the list then the value of the
<index> argument would be 3.
The query form of this command will return the index of the currently
selected bandwidth on the list. The Default is the 1st index in the
bandwidth list.
bandwidth list.
argument is a 1-based index of the position of the desired CP Ratio in
the instrument's current CP Ratio list. The list can be displayed on the
instrument by choosing the "CP Ratio (G)" submenu button in the
"Setup" menu. For example, if the desired CP Ratio is the 3rd item on
the list then the value of the <index> argument would be 3.
The query form of this command will return the index of the currently
selected CP Ratio on the list. The default CP ratio is the first index in
the CP ratio list.
PN: 10580-00319 Rev. N
Fixed WiMAX Commands
S412E PM