Display Subsystem - Anritsu LMR Master S412E Programming Manual

5-3 :Display Subsystem

5-3 :Display Subsystem
This subsystem provides commands that modify the display of data for the user. They do not
modify the way in which data are returned to the controller.
:DISPlay[:WINDow]:TRACe TRACe|MEMory|BOTH
:DISPlay[:WINDow]:TRACe?
Description: Sets the display type for the current active trace. Setting the display
Cmd Parameter: <char> TRACe|MEMory|BOTH
Query Response: <char> TRAC|MEM|BOTH
Default Value: TRAC
Front Panel Access: Shift 5 (Trace), Display
:DISPlay[:WINDow]:TRACe:FORMat SINGle|DUAL|TRI|QUAD
:DISPlay[:WINDow]:TRACe:FORMat?
Description: Defines the display trace format. The query version of this command
Syntax: :DISPlay[:WINDow]:TRACe:FORMat SINGle|DUAL|TRI|QUAD
Cmd Parameter: <char> SINGle|DUAL|TRI|QUAD
Query Response: <char> SING|DUAL|TRI|QUAD
Default Value: QUAD
Example: To set the display trace format to Dual:
Front Panel Access: Measure, Trace Format
5-34
type to TRAC will display the trace only. Setting the display type to
MEM will display the trace memory only. Setting the display type to
BOTH will display both the trace and memory.
returns "SING" if the trace format is set to Single, "DUAL" if set to dual,
"TRI" if set to Tri, and "QUAD" if set to Quad.
:DISPlay[:WINDow]:TRACe:FORMat?
:DISPlay:TRACe:FORMat DUAL
PN: 10580-00319 Rev. N
VNA Commands
S412E PM