Anritsu LMR Master S412E Programming Manual page 247

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

Mobile WiMAX Commands

:MEASure:RF:PVTime?

Title: Measure Power vs. Time

Description: Sets the active measurement to Power vs. Time, sets the default

Related Command: :READ:RF:PVTime?

:MEASure:RF:SPECtrum?

Title: Measure RF Spectrum

Description: Sets the active measurement to Spectrum, sets the default

Related Command: :CONFigure:RF SPECtrum

Front Panel Access: Measurements, RF Measurements, Channel Spectrum

measurement parameters, triggers a new measurement and returns the

Channel Power, Preamble power, burst power of data bursts, and the

Crest Factor. It is a combination of the commands :CONFigure:RF

PVTime and :READ:RF:PVTime? To make an RF ACPR measurement

with settings other than the default values, send:

:CONFigure:RF PVTime

Commands to set desired settings

:READ:RF:PVTime?

Data is returned as 4 comma-delimited values: The Channel Power in

dBm, Preamble power in dBm, burst power of data bursts in dBm, and

the Crest Factor in dB.

:CONFigure:RF PVTime

measurement parameters, triggers a new measurement and returns the

Channel Power (RSSI) and Occupied bandwidth measurement. It is a

combination of the commands :CONFigure:RF SPECtrum and

:READ:RF:SPECtrum? To make an RF Spectrum measurement with

settings other than the default values, send:

:CONFigure:RF SPECtrum

Commands to set desired settings

:READ:RF:SPECtrum?

Data is returned as 2 comma-delimited values: Channel Power (RSSI)

in dBm Occupied bandwidth measurement in MHz.

:READ:RF:SPECtrum?

:FETCh:RF:SPECtrum?

PN: 10580-00319 Rev. N

8-7 :MEASure Subsystem