Anritsu LMR Master S412E Programming Manual page 253

Mobile WiMAX Commands
Related Command: :FETCh:RF:ACPR?
:READ:RF:PVTime?
Title: Read Power vs. Time
Description: Triggers a new Power vs. Time measurement and returns the results:
Related Command: :FETCh:RF:PVTime?
:READ:RF:SPECtrum?
Title: Read RF Spectrum
Description: Triggers a new RF Spectrum measurement and returns the results:
Related Command: :FETCh:RF:SPECtrum?
S412E PM
Data is returned as 11 comma-delimited values: The Channel Power in
dBm, relative adjacent channel 1 power level, absolute adjacent channel
1 power level, relative adjacent channel 2 power level, absolute adjacent
channel 2 power level, relative adjacent channel 3 power level, absolute
adjacent channel 3 power level, relative adjacent channel 4 power level,
absolute adjacent channel 4 power level, relative adjacent channel 5
power level, absolute adjacent channel 5 power level. The relative
adjacent channel power level is in dB and the absolute adjacent channel
power level is in dBm.
:CONFigure:RF ACPR
:MEASure:RF:ACPR?
Channel Power, Preamble power, burst power of data bursts, and the
Crest Factor. It is a combination of the commands :ABORT; :INITiate;
:FETCh:RF:PVTime? The Power vs. Time measurement must be the
active measurement (specified by :CONFigure:RF PVTime). The
current measurement can be queried using :CONFigure?
Data is returned as 4 comma-delimited values: The Channel Power in
dBm, Preamble power in dBm, burst power of data bursts in dBm, and
the Crest Factor in dB.
:CONFigure:RF PVTime
Channel Power (RSSI) and Occupied bandwidth measurement. It is a
combination of the commands :ABORT; :INITiate;
:FETCh:RF:SPECtrum? The Spectrum measurement must be the active
measurement (specified by :CONFigure:RF SPECtrum). The current
measurement can be queried using :CONFigure?
Data is returned as 2 comma-delimited values: Channel Power(RSSI) in
dBm and Occupied bandwidth measurement in MHz.
:CONFigure:RF SPECtrum
:MEASure:RF:SPECtrum?
PN: 10580-00319 Rev. N
8-9 :READ Subsystem
8-21