Anritsu LMR Master S412E Programming Manual page 381

NXDN Commands
:DISPlay[:WINDow]:TRACe<Tr>:FORMat:SIGAnalyzer <graph type>
:DISPlay[:WINDow]:TRACe<Tr>:FORMat:SIGAnalyzer?
Description: Defines the graph type for the given trace <Tr>. <Tr> is the trace
Cmd Parameters: <graph type>
Query Parameters: NA
Range: CONStellation|SPECtrum|HISTogram|SUMMary|EYEDiagram|
Default Value: Trace 1: Linear Constellation
Default Unit: NA
Example: To set Trace 2 graph type to Eye Diagram:
Related Command: :CONFigure:SIGAnalyzer
Front Panel Access: Measurement, NXDN Analyzer, Graph Type
:DISPlay[:WINDow]:TRACe<Tr>:SELect
Description: Selects the given trace, <Tr>, as the active trace. <Tr> is the trace
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: TRAC1
Default Unit: NA
Example: To set trace 2 as the active trace:
Front Panel Access: Measurement, NXDN Analyzer, Active Graph
S412E PM
number in the range 1 to 4. If no trace number is specified, then the
<Tr> parameter defaults to trace number 1. <Graph Type> is the
graph type to which the specified trace is set, and it must be one of the
following values:
CONStellation|SPECtrum|HISTogram|SUMMary|EYEDiagram|
LINConstellation
The query version of this command returns "CONS" if the specified trace
graph type is set to Constellation, "HIST" if set to Histogram, "SPEC" if
set to Spectrum, "SUMM" if set to Summary, "EYED" if set to Eye
Diagram, and "LINC" if set to linear constellation.
Please note that this command only works when the current
measurement is set to NXDN Analyzer.
LINConstellation
Trace 2: Spectrum
Trace 3: Histogram
Trace 4: Summary
:DISPlay:TRACe2:FORMat:SIGAnalyzer EYEDiagram
number in the range 1 to 4 for NXDN Analyzer. If no trace number is
specified, then the <Tr> parameter defaults to trace number 1.
:DISPlay:TRACe2:SELect
PN: 10580-00319 Rev. N
12-3 :DISPlay Subsystem
12-7