Anritsu LMR Master S412E Programming Manual page 282

9-11 [:SENSe] Subsystem
[:SENSe]:CC{1|2|3|4|5}:CHANnel <number>
[:SENSe]:CC{1|2|3|4|5}:CHANnel?
Title: Component Carrier Channel
Description: Sets the channel number for the selected signal standard for the
Parameter: <number>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Channel
[:SENSe]:CC{1|2|3|4|5}:FREQuency <freq>
[:SENSe]:CC{1|2|3|4|5}:FREQuency?
Title: Component Carrier Frequency
Description: Sets the center frequency of the specified Component Carrier (CC).
Parameter: <freq>
Parameter Type: <NRf>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Center
[:SENSe]:CC{1|2|3|4|5}:SIGStandard <string>
[:SENSe]:CC{1|2|3|4|5}:SIGStandard?
Title: Component Carrier Signal Standard
Description: Selects the desired signal standard from the list. The <string>
Parameter: <string>
Parameter Type: <char>
Front Panel Access: Measurements, Over-the-Air, Carrier Aggregation, CC#, CC#, Signal
9-22
specified Component Carrier (CC).
Freq
argument is the name of the desired signal standard as displayed in the
instrument's current signal standard list. The list can be displayed on
the instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is P-GSM 900 - Uplink, then the value of the <string>
argument would be "P-GSM 900 - Uplink".
The query form of this command returns the name of the currently
selected Signal Standard from the list.
Standard
PN: 10580-00319 Rev. N
LTE Commands
S412E PM