Anritsu LMR Master S412E Programming Manual page 194

6-3 :MMEMory Subsystem
:MMEMory:LOAD:TRACe <integer>,<file name>
Description: Recalls a previously stored measurement trace from the current save
Syntax: :MMEMory:LOAD:TRACe <integer>,<file name>
Cmd Parameter: <integer>, <string> (1,file name)
Query Response: NA (no query)
Example: To recall trace with file name "trace":
Related Command: :MMEMory:STORe:TRACe
Front Panel Access: Shift-7 (File), Recall
6-4
location. The saved measurement trace that is to be loaded is specified
by <file name>. <file name> must be enclosed in either single
quotes (' ') or double quotes (" ") and must contain a file extension of
".mna". Note that the trace that is specified by <file name> must
be available at the current save location. The <integer> parameter is
not currently in use, but it must be sent. Send a 1.
File name extensions:
".spa" for SPA measurement
".mna" for VNA and VVM measurements
".hipm" for HiPM measurements
".pm" for PM measurements
".cwsg" for CWSG measurements
".afp" for AM/FM/PM measurements
".ia" for Interference Analysis measurements
".cs" for Channel Scanner measurements
".wmxd" for WiMAX
".wmxe" for Mobile WiMAX
".lte" for LTE measurements
".p25" for P25 measurements
".p252" for P25p2 measurements
".nxdn" for NXDN measurements
".dpmr" for dPMR measurements
".dmr2" for DMR 2 measurements
".ptc" for PTC measurements
".tetra" for TETRA measurements
".nbfm" for NBFM measurements
:MMEMory:LOAD:TRACe 1,"trace.mna"
:MMEMory:MSIS INTernal|USB
PN: 10580-00319 Rev. N
Vector Voltmeter Commands
S412E PM