[:Sense]:Correction:ckit:user Subsystem - Anritsu LMR Master S412E Programming Manual

5-11 [:SENSe] Subsystem

[:SENSe]:CORRection:CKIT:USER Subsystem

This subsystem contains commands to configure the user device under test (DUT).
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:
C[0]|1|2|3 <capacitance>
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:
C[0]|1|2|3?
Description: Sets the DUT capacitance value for the specified user.
Cmd Parameter: <NRf> <capacitance> (e-15, e-27, e-36, e-45)
Query Response: <NR3> <capacitance> (e-15, e-27, e-36, e-45)
Example: To set the DUT capacitance #1 for User 1 with line type coax to 5:
Front Panel Access: NA
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:
NAME <string>
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:NAME?
Description: Sets the DUT name for the specified user.
Cmd Parameter: <string> (no parameter data or units)
Query Response: <string> (no parameter data or units)
Example: To set the DUT name for User 1 with line type coax and calibration
Front Panel Access: NA
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:
OPEN <length>
[:SENSe]:CORRection:CKIT:USER[1]|2|3|4:COAX:SOLT:OPEN?
Description: Sets the DUT capacitance value for the specified user.
Cmd Parameter: <NRf> <length> (millimeters)
Query Response: <NR3> <length> (millimeters)
Example: To set the DUT open offset for User 1 with line type coax to 3 mm:
Front Panel Access: NA
5-70
:SENS:CORR:CKIT:USER:COAX:SOLT:C1 5
method SOLT:
:SENS:CORR:CKIT:USER:COAX:SOLT:NAME "SOLT1"
:SENS:CORR:CKIT:USER:COAX:SOLT:OPEN 3
PN: 10580-00319 Rev. N
VNA Commands
S412E PM