Anritsu LMR Master S412E Programming Manual page 659

AM/FM/PM Commands
[:SENSe]:FREQuency:SIGStandard:NAMe <string>
[:SENSe]:FREQuency:SIGStandard:NAMe?
Title: Signal Standard
Description: Selects the desired signal standard from the list. The <string>
Parameter: <string>
Front Panel Access: Freq, Signal Standard
[:SENSe]:FREQuency:SPAN <freq>
[:SENSe]:FREQuency:SPAN?
Title: Frequency Span
Description: Sets the frequency span. Minimum value and the maximum value are
Parameter: <freq>
Default Unit: Hz
Front Panel Access: Freq, Span
[:SENSe]:FREQuency:SPAN:FULL
Title: Frequency Span – Full
Description: Sets the frequency span to maximum span (10 MHz). Note that
Front Panel Access: Freq, Span, Max Span
[:SENSe]:FREQuency:SPAN:MINimum
Title: Frequency Span – Minimum
Description: Sets the frequency span to minimum span (10 kHz). Note that changing
Front Panel Access: Freq, Span, Min Span
S412E PM
argument is the name of the desired signal standard as displayed in the
instrument's current signal standard list. The list can be displayed on
the instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is:
P-GSM 900 - Uplink then the value of the <string> would be "P-GSM
900 - Uplink".
The query form of this command will return the name of the currently
selected Signal Standard on the list.
10 kHz and 10 MHz respectively. Note that changing the value of the
frequency span may change the Center Frequency.
changing the value of the frequency span may change the Center
Frequency.
the value of the frequency span may change the Center Frequency.
PN: 10580-00319 Rev. N
18-7 [:SENSe] Subsystem
18-17