Anritsu LMR Master S412E Programming Manual page 197

Vector Voltmeter Commands
Trace Header Parameters
Table 6-2 describes parameters that can be returned by the :TRACe:PREamble? command.
Table 6-2. Trace Header Parameters
Parameter Name
SN
UNIT_NAME
DATE
APP_NAME
APP_VER
VVM_MODE
VVM_CW_FREQ
VVM_MEAS_TYPE
VVM_RETURN_MEAS_FORMAT
VVM_CABLE
VVM_PORT_X_SAVE_RETURN_REF
VVM_PORT_X_SAVE_INSERTION_REF
VVM_PORT_X_RETURN_REF_AMP
VVM_PORT_X_RETURN_REF_PHASE
VVM_PORT_X_RETURN_REF_VSWR
VVM_PORT_X_RETURN_REF_REAL
VVM_PORT_X_RETURN_REF_IMAG
VVM_PORT_X_INSERTION_REF_AMP
VVM_PORT_X_INSERTION_REF_PHASE
S412E PM
Instrument Serial #
Instrument name
Trace date/time
Application name
Application firmware (FW) version
Mode
0 = CW
1 = Table
CW frequency
Measurement type.
0 = Return
1 = Insertion
Return Type Measurement Format
0 = dB
1 = VSWR
2 = Impedance
Selected Cable number 1 to 12
Saved status for Port x Return reference,
where x = 1 or 2
Saved status for Port x Insertion reference,
where x = 1 or 2
Return reference amplitude for Port x,
where x = 1 or 2
Return reference phase for Port x,
where x = 1 or 2
Return reference VSWR for Port x,
where x = 1 or 2
Return reference real for Port x,
where x = 1 or 2
Return reference imaginary for Port x,
where x = 1 or 2
Insertion reference amplitude for Port x,
where x = 1 or 2
Insertion reference phase for Port x,
where x = 1 or 2
PN: 10580-00319 Rev. N
6-4 :TRACe Subsystem
Description
6-7