Anritsu LMR Master S412E Programming Manual page 228

7-11 [:SENSe] Subsystem
[:SENSe]:DEMod:SFLatness:STOP:X?
Title: Spectral Flatness Stop Value
Description: Queries the Spectral Flatness stop value.
Related Command: :DEMod:SFLatness:STARt:X?
[:SENSe]:DLFLength 2.5|5|10
[:SENSe]:DLFLength?
Title: Down Link Frame Length
Description: Sets the Down Link Frame Length, in milliseconds.
Parameter: 2.5|5|10
Default Value: 2500 us
Default Unit: seconds
Front Panel Access: Setup, Frame Length
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer?
Title: Center Frequency
Description: Sets the center frequency. Note that changing the value of the center
Parameter: <freq>
Default Value: 2.5 GHz
Default Unit: Hz
Range: 0 Hz to 7.1 GHz
Front Panel Access: Freq, Center Freq
[:SENSe]:FREQuency:SIGStandard:CHANnel <number>
[:SENSe]:FREQuency:SIGStandard:CHANnel?
Title: Channel Selection
Description: Sets the channel number for the selected signal standard.
Parameter: <number>
Front Panel Access: Freq, Channel
7-28
The query form of this command will return the Down Link Frame
Length in seconds (not milliseconds).
frequency will change the value of the coupled parameters Start
Frequency and Stop Frequency.
PN: 10580-00319 Rev. N
Fixed WiMAX Commands
S412E PM