Anritsu LMR Master S412E Programming Manual page 49

Spectrum Analyzer Commands
:CALCulate:LIMit:MIRRor
Title: Limit Mirror
Description: Creates a limit mirror. Use :CALCulate:LIMit:TYPe to set the currently
Related Command: :CALCulate:LIMit:TYPe
:CALCulate:LIMit:POINt:ADD
Title: Add Limit Point
Description: Adds a new limit point to the currently active limit line. Use
Related Command: :CALCulate:LIMit:TYPe
Front Panel Access: Shift-6 (Limit), Limit Edit, Add Point
:CALCulate:LIMit:POINt:DELete
Title: Delete Limit Point
Description: Deletes the currently active limit point. The active point becomes the
Example: To delete the currently active limit point:
Front Panel Access: Shift-6 (Limit), Limit Edit, Delete Point
:CALCulate:LIMit:POINt:LEFT
Title: Next Point Left
Description: Selects the limit point immediately to the left of the active point,
Example: To select the point to the left of the active point:
Front Panel Access: Shift-6 (Limit), Limit Edit, Next Point Left
:CALCulate:LIMit:POINt:RIGHt
Title: Next Point Right
Description: Selects the limit point immediately to the right of the active point,
Example: To select the point to the right of the active point:
Front Panel Access: Shift-6 (Limit), Limit Edit, Next Point Right
S412E PM
active limit line.
:CALCulate:LIMit:TYPe to set the currently active limit line.
point that is immediately to the left of the point that was deleted. Note
that deletion is only valid if there are more than 2 limit points. Use
:CALCulate:LIMit:TYPe to set the currently active limit line.
:CALCulate:LIMit:POINt:DELete
making it active for editing or deleting. Use :CALCulate:LIMit:TYPe to
set the currently active limit line.
:CALCulate:LIMit:POINt:LEFT
making it active for editing or deleting. Use :CALCulate:LIMit:TYPe to
set the currently active limit line.
:CALCulate:LIMit:POINt:RIGHt
PN: 10580-00319 Rev. N
4-2 :CALCulate Subsystem
4-7