Configure Subsystem - Anritsu LMR Master S412E Programming Manual

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

LTE Commands

:CONFigure Subsystem

This set of commands prepares the instrument for the selected measurement. It disables any

currently-enabled measurements and activates the specified measurement. It sets the

instrument to single sweep mode, waiting for an :INITiate command. It will not initiate the

taking of a measurement.

Current instrument settings may be changed to default values. These changes are identified

with their respective measurement commands.

Title: Configure Query

Description: :CONFigure? query returns the name of the measurement previously

set up using a CONFigure command or a MEASure? query. The list

below shows the possible return values.

PN: 10580-00319 Rev. N

9-3 :CONFigure Subsystem