Anritsu LMR Master S412E Programming Manual page 411

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

NXDN Commands

[:SENSe]:DM:BWIDth 12.5|6.25

[:SENSe]:DM:BWIDth?

Description: Sets the modulation bandwidth. Please note that setting the modulation

Cmd Parameters: 12.5|6.25

Query Parameters: NA

Range: 12.5|6.25

Default Value: 12.5

Default Unit: kHz

Example: To set the modulation bandwidth to 6.25 kHz:

Front Panel Access: Setup, Mod Bandwidth

[:SENSe]:DM:PATTern 1031hz|O.153|VOICe|CTRLchan

[:SENSe]:DM:PATTern?

Description: Sets the receiver pattern type. Please note that setting the Rx pattern

Cmd Parameters: 1031hz|O.153|VOICe|CTRLchan

Query Parameters: NA

Range: 1031hz|O.153|VOICe|CTRLchan

Default Value: 1031hz

Default Unit: NA

Example: To set the modulation pattern to voice:

Front Panel Access: Setup, Rx Pattern

bandwidth will restart the sweep.

Note: Modulation bandwidth value is set and returned in kHz.

:DM:BWIDth 6.25

type will restart the sweep.

:DM:PATTern VOICe

PN: 10580-00319 Rev. N

12-13 [:SENSe] Subsystem