[:Sense]:Correction Subsystem - Anritsu LMR Master S412E Programming Manual

VNA Commands

[:SENSe]:CORRection Subsystem

This subsystem provides commands for losses or gains external to the instrument.
[:SENSe]:CORRection:DATA? <error terms parameters>
Description: Transfers the system error correction data from the instrument to the
Cmd Parameter: NA (query only)
Query Parameter: <char> <error terms parameters>
Query Response: <char> (returns block data)
Related Command: :FORMat:DATA
Front Panel Access: NA
S412E PM
controller. <error term parameter> are string parameters that
describe the different error terms.
<error term parameter>
ERF
EDF
ESF
ETF
ELF
EXF
ETFS
ELFS
EXFS
The format of the block data that is returned can be specified by the
command :FORMat:DATA. The response begins with an ASCII header
that specifies the number of data bytes. It appears in the format #AX,
where A is the number of digits in X, and X is the number of bytes
that follow the header. Each data point is separated by a comma
delimiter. Each term contains one complex value (real and imaginary)
for each sweep point.
PN: 10580-00319 Rev. N
5-11 [:SENSe] Subsystem
Description
(Forward) Reflection tracking
(Forward) Directivity
(Forward) Source match
(Forward) Transmission tracking
(Forward) Load match
(Forward) Isolation
(Forward Sensitivity) Transmission tracking
(Forward Sensitivity) Load match
(Forward Sensitivity) Isolation
5-67