dPMR Commands
:CONFigure:COVerage
Description: This command configures the dPMR Coverage measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to dPMR Coverage:
Front Panel Access: Measurement, dPMR Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the dPMR Analyzer measurement. Certain
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to dPMR Analyzer:
Front Panel Access: Measurement, dPMR Analyzer
S412E PM
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
:CONFigure:COVerage
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
:CONFigure:SIGAnalyzer
PN: 10580-00319 Rev. N
13-2 :CONFigure Subsystem
13-3