Calculate:transform Subsystem - Anritsu LMR Master S412E Programming Manual

VNA Commands

:CALCulate:TRANsform Subsystem

Front panel soft keys that are related to distance measurements, such as the
Additional Dist Setup soft key, appear in menus only when the Setup Domain is set up for
distance.
:CALCulate:TRANsform:DISTance:MAXimum?
Description: This command returns the maximum distance in millimeters if the
Cmd Parameter: NA (query only)
Query Response: <NR3> (millimeters or feet)
Default Value: For 1.6 GHz Model: 18.7429 m
Default Unit: millimeters (mm)
Range: –3000.0 m to +3000.0 m
Front Panel Access: Freq/Dist, Additional Dist Setup, Distance Info
:CALCulate:TRANsform:DISTance:RESolution?
Description: This command returns the distance resolution in millimeters if the
Cmd Parameter: NA (query only)
Query Response: <NR3> (millimeters or feet)
Default Value: For 1.6 GHz Model: 18.743 cm
Default Unit: millimeters (mm)
Range: –3000.0 m to +3000.0 m
Front Panel Access: Freq/Dist, Additional Dist Setup, Distance Info
S412E PM
current distance unit is set to meter, and otherwise returns the
maximum distance in feet. This value is set based on the number of
data points, the propagation velocity, and the start and stop frequency.
For 6 GHz Model: 4.997 m
current distance unit is set to meter, and otherwise returns the
resolution in feet. This value is set based on the propagation velocity
and the start and stop frequencies.
For 6 GHz Model: 4.997 cm
PN: 10580-00319 Rev. N
5-2 :CALCulate Subsystem
5-31