Anritsu LMR Master S412E Programming Manual page 531

PTC Commands
:SOURce:STATe OFF|ON|0|1
:SOURce:STATe?
Description: Turns the signal generator ON or OFF. Please note that the Generator
Cmd Parameters: OFF|ON|0|1
Query Parameters: NA
Range: OFF|ON|0|1
Default Value: OFF
Default Unit: NA
Example: To turn the signal generator on:
Front Panel Access: Turn Sig-Gen ON/OFF
S412E PM
ON/OFF button will toggle depending on the state. When the signal
generator is on, the button will show Turn Sig-Gen OFF. When the
signal generator is off, the button will show Turn Sig-Gen ON. The query
returns the current signal generator state. A return value of 1 means
ON and a return value of 0 means OFF.
:SOURce:STATe ON
PN: 10580-00319 Rev. N
15-10 :SOURce Subsystem
15-27