[:Sense]:Correction:ckit Subsystem - Anritsu LMR Master S412E Programming Manual

An integrated, handheld multi-function land mobile radio test tool

Hide thumbs Also See for LMR Master S412E:

Table of Contents

VNA Commands

[:SENSe]:CORRection:CKIT Subsystem

This subsystem provides commands that modify and configure the device under test (DUT).

[:SENSe]:CORRection:CKIT:INFormation? <connector>

Description: Returns a string of information of the given calibration connector.

Cmd Parameter: NA (query only)

Query Parameter: <char> <connector>

Query Response: <block> (returns comma-delimitted ASCII format)

Front Panel Access: NA

<connector> defines the connector family. Valid connectors for

calibration line type COAX are as follows:

TNCFemale|SMAMale|SMAFemale|USR1|USR2|USR3|USR4

Note that the connector must be for valid for the current calibration line

Note that user 1, 2, 3, or 4 is based on the current calibration method.

The response begins with an ASCII header. The header specifies the

number of following bytes. It appears in the format #AX, where A is

the number of digits in X, and X is the number of bytes that follow

the header. Parameters are returned in comma-delimited ASCII format.

Each parameter is returned as "NAME=VALUE[UNITS]."

PN: 10580-00319 Rev. N

5-11 [:SENSe] Subsystem