Anritsu LMR Master S412E Programming Manual page 223

Fixed WiMAX Commands
Table 7-1. Available Parameters in WiMAX and Mobile WiMAX Mode (Sheet 2 of 3)
Parameter Name
CHANNEL
POWER_OFFSET
REFERENCE_FREQUENCY
UNITS
CURRENT_VIEW
CURRENT_MEASURMENTS
DYNAMIC_ATTENUATION
SPAN
PVT_FRAME_START_TIME
PVT_FRAME_STOP_TIME
BW_SELECT
CURRENT_SPECTRUM_VIEW
I_Q_VIEW
RUN_HOLD
TEST_MODEL
CP_RATIO
SPECTRUM_SPAN
AUTO_SPAN
MAX_HOLD
EVM_SUB_CARRIER_TOP
EVM_SUB_CARRIER_SCALE
SPECTRAL_FLATNESS_SCALE
ACPR_DISPLAY_GRAPH
NUM_OF_ACPR_MAIN_CHANNELS
NUM_OF_ACPR_ADJC_CHANNELS
CONSTELLATION_REFERENCE_POI
NTS
SPECTRAL_FLATNESS_TOP
SPECTRAL_FLATNESS_EVM_SUB_S
TART
SPECTRAL_FLATNESS_EVM_SUB_S
TOP
EVM_SYM_START
S412E PM
Description
Current channel
Applied power offset
Selected external reference frequency
Amplitude units
Current view
Current measurements
Dynamic range on/off
Frequency span
Power vs. Time start time
Power vs. Time stop time
Current Bandwidth (MHz)
Current spectrum view (single or multiple channel
spectrum)
IQ view
Run/Hold on/off
Current pass fail model being tested
Cyclic Prefix Ratio (the value is the index of the CP
Ratio list, where a value of 0 is the first index in the
list)
Spectrum frequency span (the value is the index of the
span list, where a value of 0 is the first index in the list
Auto span on/off
Max hold on/off
Y Axis Max for EVM vs. Symbol/Sub-Carrier
EVM vs. Symbol/Sub-Carrier scale
Spectral Flatness scale
Display ACPR trace on/off
Number of main channels
Number of adjacent channels
Constellation reference points on/off
Y Axis Max for Spectral Flatness
Spectral Flatness/EVM vs. sub-carrier start
Spectral Flatness/EVM vs. sub-carrier stop
EVM vs. Symbol start
PN: 10580-00319 Rev. N
7-10 :TRACe Subsystem
7-23